By: Wanda Simone
Last Updated: May 13, 2024
This post may contain affiliate links. If you make a purchase through links on our site, we may earn a commission at no additional cost to you. See our disclosure policyfor more info.
These DIY Grinch Christmas ornaments are inexpensive and super simple to make. The perfect addition to your Grinch Christmas decorations!
Print Tutorial
When I was putting together my Grinch Christmas tree, I wanted a few ornaments that added to my Grinch Who Stole Christmas theme without spending a lot of time or money.
So I came up with these super simple printed and glued DIY Grinch Christmas ornaments.
That look pretty effective on the tree.
Supplies
Materials
- paper
- glue – I used a glue stick*
- 3″ flat wood circle*
- ribbon or thread for hanging
- free printable ornament patterns – these are available in our subscriber’s only resource library. If you’re not a subscriber, you can sign up below to get access.
Equipment
- color printer
- scissors
- drill with 1/4″ drill bit – The drill bit can be a little larger or smaller than this. It just needs to be big enough to fit a ribbon through.
- pen or pencil
How To Make DIY Grinch Ornaments
Cut The Patterns
Print off two copies of the printable Grinch ornament patterns.
Cut them out on the circles.
Drill a hole in the top of the wood circle.
Glue On The Pattern
Spread glue on one side of the wood circle, making sure to get the glue all the way to the edges.
Turn one of the paper Grinch circles over. Make sure you know where the top of the picture is (so you can position the wood circle with the hole at the top).
Then place the glue side of the wood circle down on the back of the paper circle, making sure that the drilled hole is at the top of the picture on the other wide.
Trim the paper around the edges of the wood circle. It is easier to get it cut evenly by turning the ornament over and cutting it from the back side.
Repeat with the second copy of the printable on the other side of the wood circle.
Hang The Ornaments
Wait until the glue has dried. This will prevent the paper from moving when you make the hole.
Use a pen or pencil to poke a hole in the paper where the hole in the wood circle is.
Now you should have 4 different ornament patterns.
String a ribbon or thread through the hole and tie it.
The Finished DIY Grinch Ornaments
Now you’re ready to hang the DIY Grinch ornaments on your tree.
They look great with other red, white and green Christmas tree decorations.
And that’s all there is to it.
I told you this was going to be easy!
Other Grinch Christmas Ideas You Might Like
- Grinch Christmas decor ideas
- Grinch Christmas Tree
- DIY Grinch wreath
- DIY Grinch garland
- Grinch Bingo
- Grinch party food and drink ideas
- Grinch outdoor decor ideas
Print Pin
Printable Grinch Christmas Ornaments
These printable Grinch Christmas ornaments are super easy to make and look so cute on a Grinch-inspired Christmas tree
Total Time 30 minutes minutes
Author Wanda Simone
Cost $5
Equipment
color printer
scissors
drill with 1/4″ drill bit
pen or pencil
Materials
- paper
- glue
- 4 3-inch flat wood circles
- ribbon or thread for hanging
- free printable ornament pattern from our resource library, sign up above
Instructions
Print off two copies of the printable Grinch ornament patterns.
Cut them out on the circles.
Drill a hole in the top of the wood circles.
Spread glue on one side of the wood circle, making sure to get the glue all the way to the edges.
Turn one of the paper Grinch circles over. Make sure you know where the top of the picture is (so you can position the wood circle with the hole at the top).
Then place the glue side of the wood circle down on the back of the paper circle, making sure that the drilled hole is at the top of the picture on the other side.
Trim the paper around the edges of the wood circle.
Repeat with the second copy of the printable on the other side of the wood circle.
Wait until the glue has dried. This will prevent the paper from moving when you make the hole.
Use a pen or pencil to poke a hole in the paper where the hole in the wood circle is.
String a ribbon or thread through the hole and tie it. Then you’re ready to hang it on the tree.
Have comments or questions about our DIY Grinch Christmas ornaments? Tell us in the section below.
This post was originally published on November 9, 2020 but was updated with new content on May 13, 2024.
